Universal input - AirIM-100S Wireless sensor low power

DESCRIPTION

• The sensor has a pulse, analog, binary input and terminals for connecting the temperature sensor.
• In conjunction with the sensor it is used, for example, for monitoring the level, temperature, gas, water or electricity, fl ooding...
• It provides a quick solution to learn about the critical condition of your device which you can immediately respond to (e.g. service interference).
• Using the universal sensor will help you eliminate fi nancial losses caused by device malfunctions, or report the need for action in advance.
• For each power meter it is necessary to have one universal AirIM-100 sensor.
• With the wireless solution and Sigfox / LoRa / NB-IoT communication, it can communicate instantly to your chosen location and be operated immediately.
• Data is sent to the server from which it can be subsequently displayed as a smart phone, application, or Cloud notification
• Anti-sabotage: If access to the device is unauthorized, a message is immediately sent to the server.
• Power supply: 5-12 V DC or 1x 3.6 V batteries SAFT with approx. 5 years (depending on the frequency of use)
• In the case of external power, the battery is automatically disconnected and serves as backup power.
• Battery power can be sent to the server when it is powered by a battery.
• Protection degree IP65.

TECHNICAL PARAMETERS

• Battery power: 1x 3.6V LS 14500 Li-SOCl2 AA
• Standby consumption:  0.2 mW 
• Setting: With a message from the server using setting pins, SET button, programming cable
• Alarm Detection: message to the server 
• Control: button SET Magnetic contact Tamper
• Protocol: Sigfox
• Transmitter frequency: RCZ1 868 MHz 
• Range in open space: Approx. 50 km (Depending on network coverage)
• Working temperature: 30…+60°C (Pay attention to the operating temperature of batteries
• Operating position: any
• Mounting: glue / screws 
• Protection degree: IP65
• Dimension: 182 x 62 x 34 mm  
• Weight: 108 g (without battery)