Industrial Cellular Router CAT 6 Teltonika RUTX09
*Prices are Excl. VAT, duty and shipping costs and may change due to exchange rate.
UTX09 is LTE-A Cat 6 cellular IoT router with Dual-SIM, Carrier Aggregation, and 4 Gigabit Ethernet interfaces. RUTX09 is designed as a Main/Backup internet source offering cellular speeds up to 300 Mbps, where steady connection and high data throughput is necessary.
Teltonika RUTX09
RUTX09 is LTE-A Cat 6 cellular IoT router with Dual-SIM, Carrier Aggregation, and 4 Gigabit Ethernet interfaces. RUTX09 is designed as a Main/Backup internet source offering cellular speeds up to 300 Mbps, where steady connection and high data throughput is necessary. It has plenty of processing capacity for custom applications on the OpenWrt based RutOS system. Plenty of security features are available, like Firewall, VPN, IPsec, SNMP, Content Filtering for maximized safety. This product is compatible with our Remote Management System for convenient monitoring, maintenance, and data collection.
4G LTE CAT 6
Cellular speeds up to 300Mbps with Carrier Aggregation
Dual Sim
With auto failover, backup WAN and other switching scenarios
Gigabit Ethernet
4 x Gigabit Ethernet ports with up to 128 port/tag-based VLANs supported
GNSS
Global Navigation Satellite System for location services and time synchronization
Security
Firewall and numerous VPN services including OpenVPN, IPsec, PPTP, L2TP & DMVPN
RMS
Compatible with Teltonika Remote Management System
Mobile | |
Mobile module | 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps |
SIM switch |
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail |
Status | Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID |
SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply |
USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
Black/White list | Operator black/white list |
Mutliple PDN | Possibility to use different PDNs for multiple network access and services |
Band management | Band lock, Used band status display |
APN |
Auto APN |
Bridge mode |
Direct connection (bridge) between mobile ISP and device on LAN |
Ethernet | |
WAN | 1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
LAN | 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
Network | |
Routing | Micro-USB / Headphone jack |
Network protocols | Ambient Light / Proximity / Accelerometer / Geomagnetic |
VoIP passthrough support | Audio (MP3, MIDI, AMR, AAC, WAV) / Video (AVI, MP4, 3GPP) |
Connection Monitoring | Dual micro-SIM |
Firewall | Port forwards, traffic rules, custom rules |
DHCP |
Static and dynamic IP allocation, DHCP Relay, Relayd |
QoS / Smart Queue management (SQM) | Traffic priority queuing by source/destination, service, protocol or port |
DDNS |
Supported >25 service providers, others can be configured manually |
Network Backup | VRRP, Mobile and Wired WAN options, each of which can be used as an automatic Failover |
Load balancing | Balance Internet traffic over multiple WAN connections |
Hotspot | Internal/external Radius server, captive portal, built in customizable landing page |
SSHFS(optional) | Possibility to mount remote file system via SSH protocol (not available in standard FW) |
Security |
|
Authentication |
Pre-shared key, digital certificates, X.509 certificates |
Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
Attack Prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
VLAN | Port and tag based VLAN separation |
Mobile quota control | Custom data limits for both SIM cards |
WEB filter | Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only |
Access control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
VPN | |
OpenVPN | Multiple clients and a server can run simultaneously, 12 encryption methods |
OpenVPN Encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPsec | IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256) |
GRE | GRE tunnel |
PPTP, L2TP | Client/Server instances can run simultaneously, L2TPv3 support |
Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code |
DMVPN | Method of building scalable IPsec VPNs |
SSTP | SSTP client instance support |
ZeroTier | ZeroTier VPN client support |
WireGuard | WireGuard VPN client and server support |
Modbus TCP SLAVE |
|
ID filtering | Respond to one ID in range[1;255] or any |
Allow remote access | Allow access through WAN |
Custom registers | Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality |
Modbust TCP Master |
|
Supported fuctions | 01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
MQTT Gateway | |
Gateway | Allows sending commands and receiving data from ModBus Master through MQTT broker |
Data to server |
|
Protocols | HTTPS(S), MQTT, Azure MQTT, Kinesis |
Monitoring and management | |
WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
FOTA | Firmware update from server, automatic notification |
SSH | SSH (v1, v2) |
SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS autoreply |
CALL | Reboot, Status, Mobile data on/off, Output on/off |
TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
MQTT | MQTT Broker, MQTT publisher |
SNMP | SNMP (v1, v2, v3), SNMP trap |
JSON-RPC | Management API over HTTP/HTTPS |
Modbus | Modbus TCP status/control |
RMS | Teltonika Remote Management System (RMS) |
System characteristics | |
CPU | QUAD-core ARM Cortex A7, 717Mhz |
RAM | 256MB, DDR3 |
FLASH storage | 256 MB, SPI Flash |
Firmware / configuration | |
WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup |
FOTA | Update FW/configuration from server |
RMS | Update FW/configuration for multiple devices at once |
Keep settings | Update FW without losing current configuration |
Firmware Customization | |
Operating system | RutOS (OpenWrt based Linux OS) |
Supported languages | Busybox shell, Lua, C, C++ |
Development tools | SDK package with build environment provided |
Location tracking | |
GNSS | GPS, GLONASS, BeiDou, Galileo and QZSS |
Coordinates | GNSS coordinates via WebUI, SMS, TAVL, RMS |
NMEA | NMEA 0183 |
Server Software | Supported server software: TAVL, RMS |
Mobile Network Geolocation | Get approximate device location on RMS based on mobile cell tower position (without using GPS) |
Geofencing | Configurable multiple geofence zones |
USB | |
Data rate | USB 2.0 |
Applications | Samba share, USB-to-serial |
External devices | Possibility to connect external HDD, flash drive, additional modem, printer |
Storage formats | FAT, FAT32, NTFS |
Input/Output | |
Input | 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high |
Output | 1 x Digital Output, Open collector output, max output 30 V, 300 mA |
Events | SMS, Email, RMS |
Power | |
Connector | 4 pin industrial DC power socket |
Input voltage range | 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection |
PoE (passive) | Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af, 802.3at and 802.3bt standards |
Power consumption | 9 W Max |
Physical Interfaces (PORTS, LEDS, ANTENNAS, BUTONS, SIM) | |
Ethernet | 4 x RJ45 ports, 10/100/1000 Mbps |
I/Os | 1 x Digital Input, 1 x Digital Output on 4 pin power connector |
Status LEDs | 3 x WAN type, 2 x Mobile connection type, 5 x Mobile connection strength, 8 x LAN status, 3 x WAN status, 1x Power |
SIM | 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders |
Power | 1 x 4 pin DC connector |
Antennas | 2 x SMA for LTE, 1 x SMA for GNNS |
USB | 1 x USB A port for external devices |
Reset | Reboot/User default reset/Factory reset button |
Other | 1 x Grounding screw |
Phsycial Specification | |
Casing material | Aluminium housing with DIN rail mounting option |
Dimensions (W x H x D) | 115 x 44.2 x 95.1mm |
Weight | 455g |
Mounting options | DIN rail, flat surface placement |
Operating environment | |
Operating temperature | -40 C to 75 C |
Operating humidity | 10% to 90% non-condensing |
Ingress Protection Rating | IP30 |
Regulatory & Type Approvals | |
Regulatory | CE/RED, EAC, RoHS, WEEE |
EMI Immunity | |
Standards | Draft EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0 |
EN61000-4:2009 | ESD |
RS | EN 61000-4-3:2006 + AI:2008 + A2:2010 |
EFT | EN 61000-4-4:2012 |
Surge protection | EN 61000-4-5:2014 |
CS | EN 61000-4-6:2014 |
DIP | EN 61000-4-11:2014 |
RF | |
Standards | EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.2, EN303 413 V1.1.1 |
Safety | |
Standards |
IEC 62368-1:2014, EN 62368-1:2014 + A11:2017 |
For orders under € 450 we charge € 25 order costs.
Prices shown on this website are before taxes, currency changes and shipping costs.
For an accurate price please contact our sales team at info@comm-co.com
Shipping costs may vary after receiving the package from the manufacturer. And a recalculation takes place.