K-1900-6-EWP IP phone for VoIP SIP PoE

The K-1900-6-EWP IP phone can be programmed to automatically dial a phone number after lifting the handset. If the call is not answered can call the K-1900-6 IP EWP to 4 reserve numbers. The K-1900-6 IP EWP is designed for fast and reliable communications for VoIP SIP systems with PoE. The phone can be configured from a PC on the same LAN or remotely with a static IP address.

If the call is answered from the K-1900-6 IP EWP receiver can operate the relay for controlling door locks or gates. This relay is also configurable to activate during a call, and can be used for CCTV control.

The K-1900-6 IP EWP has the same features as the K-1900-6 IP but with Enhanced Weather Protection (EWP). EWP by this phone can also be used outdoors. EWP includes as an extra; foam seals, closed terminals, potted electronics, protecting the speaking and listening component, and more. This phone is thus withstand a humidity of 100%.

applications

• Door and gate communication
• telephone kiosk
• customer service phone
• Self Service Points
• Security and emergency phone
• detention Phone

Opportunities

• Vandal Resistant: 316 stainless steel high quality stainless steel front, heavy handset hook and hook switch, stainless steel armor cloak and security screws (Torx).
• Weatherproof: Marine grade stainless steel 316 stainless steel front and Torx screws.
• Telephone with (compatible HAC) volume via closed pushbutton horn.
• 2Amp relay make and break for door lock control or CCTV signaling.
• SIP compliant (see list of tested IP PBX systems)
• Power supply: Power over Ethernet (PoE) (class 2, <6.5W)
• Automatic Noise Canceling (ANC) function for good communication in loud surroundings.
• Firmware can be downloaded from the network
• The K-1900-6 IP EWP is standard equipped with 54 "armed handset cord.
• Automatically dials up to 4 reserve numbers on busy or no answer.
• Variants with Enhanced Weather Protection (EWP) are waterproof (IP66 protection)
• To configure remotely.
• Wide temperature range -40 ° C to 60 ° C
• Automatically assume for monitors.

specifications

• Power supply: PoE (Class 2, <6.5W)
• Size: 116mm x 115mm x 95mm
• Weight: 0.9 kg
• Temperature range: -40 ° C to 60 ° C
• Humidity K-1900-6 IP EWP: RH 100%
• Handset cable length K-1900 IP EWP 53 "to 58"
• Installation: mounting (including junction box.)
• Audio Codec: G711u, G711A, G722
• Network: IEEE 802.3 af PoE, RFC3261 SIP 2.0, 100BASE-TX with auto crossover
• Connection (1) RJ45 10/100 Base-T