• The flood detector is used to detect water leakage - the activation occurs the moment the fl ooding of the contacts located on the underside of the detector occurs.
• Provides a quick solution to learn about unwanted fl ooding in your bathroom or kitchen that you can react too immediately.
• With a wireless Sigfox / LoRa / NB-IoT communication network the device can be immediately put in the desired location and run immediately.
• Anti-sabotage function - the detector contains a motion sensor and sends a message to the server during any unauthorized manipulation.
• Flood detection is signalled by vibration, optical and acoustic signalling. In the case of water detection, data is sent to the server, ...
• Data is sent to the server from which it can be subsequently displayed as a smartphone, application, or Cloud notification.
• Anti-sabotage: If access to the device is unauthorized, a message is immediately sent to the server.
• Power supply: 1x CR123A battery life approx. 2 years (depending on frequency of use).

TECHNICAL PARAMETERS

• Battery power: 1x CR123A battery 
• Battery life: approx. 2 years (depending on frequency of use) 
• Alarm Detection: message to the server, vibration, optical and audible alarm 
• Acoustic signal: greater than 85 dB 
• Detection principle: contact between the sensor sensed liquid 
• Measurement accuracy: 99.8 % 
• Sensitivity: in the range 0.03 - 20 kΩ 
• Protocol: LoRa
• Transmitter frequency: 868 MHz 
• Range in open space: Approx. 10 km (Depending on network coverage)
• Working temperature: 0…+50°C (Pay attention to the operating temperature of batteries)
• Operation position: capture contacts for fl ooding downwards 
• Mounting: loose
• Protection degree: IP68
• Dimension: Ø 89 x 23 mm 
• Weight: 25 g (without battery)